68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Classic side buttons | Posted by: hiki on 2019-08-02 10:51:38
Howdy, howdy!
What do the two buttons on the left hand side of the mac classic do? I pressed one of them while the computer was on, the desktop reloaded, and now the OS isn't reading any files from the HDD (at least displaying them).
The files are still there.. If I boot from ROM into System 6, I can browse the HDD and see that the files are still intact. I'm confused.
Any info would be great, thanks!
| Posted by: hiki on 2019-08-02 11:05:17
I've found out that this invokes the system's debugger, MicroBug. I also found a document on how to use it. Still no mention of why my HDD isn't being read, maybe the volume was unmounted?
| Posted by: Dog Cow on 2019-08-02 14:57:43
Howdy, howdy!
What do the two buttons on the left hand side of the mac classic do? When you're facing the screen, the one closer to you is Reset, the one behind it is Interrupt.
If you install Macsbug in your System Folder, you'll get the Macsbug debugger when you press Interrupt, which is a lot more useful than the built-in debugger.
| Posted by: hiki on 2019-08-02 15:07:17
When you're facing the screen, the one closer to you is Reset, the one behind it is Interrupt.
If you install Macsbug in your System Folder, you'll get the Macsbug debugger when you press Interrupt, which is a lot more useful than the built-in debugger. Thanks! Do you happen to know why pressing the Interrupt button caused my files to not show up in the finder? Like I said, they're there... but finder isn't displaying them. It's weird.
| Posted by: Dog Cow on 2019-08-03 19:23:46
Try using Disk First Aid to repair your disk. You may have interrupted some file I/O.
| | 1 |
|