68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| MacTCP Networking | |
| Posted by: WakelessFoil on 2019-05-06 18:35:05 I recently got my Macintosh Plus working with all 4 MB of ram. I have an Asante EN/SC Ethernet to SCSI adapter and want to put it to some use. I hooked up everything and downloaded the EN/SC EtherTalk software along with AppleTalk 57.0.4. Installed it on system 7.1 and also got MacTCP 2.1. I made sure to hook the adapter to a 10base-T only hub so it wouldn’t get confused with 10/100. I tried to configure the TCP/IP settings but I don’t think it’s making a connection at all. MacWeb won’t connect or load it just spits out an error code as if the machine was connected to nothing. Here is a post from someone who had success with a similar setup: http://lowendmac.com/rivera/05/1129.html any help and/or advice is greatly appreciated! Below are some images of my TCP control panel as well as a hardware diagram.   | |
| Posted by: PotatoFi on 2019-05-20 12:28:16 I think your DNS stuff is wrong. Try this:
| |
| 1 |