| Click here to select a new forum. |
| Mac IIci - Mouse pointer freezes when using RasterOps/24 |
Posted by: asapreta on 2019-01-30 15:47:44
I am trying to figure out what might happened to my RasterOps/24 card.
When I got this IIci it was working. Then, when using my External SCSI Zip drive the computer froze.
Since then I wasn't able to boot the machine with the RasterOps card. It hanged on the grey screen.
Today I got a second monitor and decided to hook up the RasterOps again.
The computer/system recognizes the two monitors but it I move the mouse to the one with the RasterOps the mouse pointer gets stuck and won't move.
I am really amazed with this.
Did this happen to anyone?
|
Posted by: Johnnya101 on 2019-01-30 15:51:49
Has it been recapped? Always a good starting point if it hasnt been.
|
Posted by: asapreta on 2019-01-30 15:57:42
Has it been recapped? Always a good starting point if it hasnt been. The IIci yes, it has been recapped.
|
Posted by: asapreta on 2019-01-30 15:59:32
I did this smalll video:
|
Posted by: Johnnya101 on 2019-01-30 16:03:53
Maybe try reinstalling drivers? Seems like something could be corrupted?
|
Posted by: IIfx on 2019-02-15 12:19:13
I would also try reinstalling the system software to eliminate that as a problem source.
RasterOps Drivers:
https://vintageapple.org/macdrivers/video/knighttech/DiskImages/RasterOps/RasterOpsGFXInstall3.3.smi.hqx
|
Posted by: tt on 2019-03-06 00:07:17
Your post reminds me that I had a similar issue with a Radius video board. If it was installed, the mouse would be frozen. It is also a recapped logic board. ??
|
| 1 |