68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | First TAM, first problem | Posted by: ninjafist1 on 2018-09-23 20:11:02
Hey everyone, so I replaced the HDD with a CF in my new TAM, used an IDE to CF adapter. Booted it up and nothing, black screen. Fan spun up, I believe it tried to read the CD which was the restore disc, also tried an OS 8 disc, and nothing. Went back to the old HDD and no problems. Any ideas? Was I not hitting the right combo of keys? Can it not see my CF card? I did notice that the IDE cable had a little plug in one hole that I had to pull to get the CF adapter to go on but I used parts that were recommended here in an older post. Any help? Protocol? Thanks
| Posted by: EvilCapitalist on 2018-09-24 05:35:55
Welcome to the TAM owners club!
Make absolutely sure that you've got some type of shielding between the IDE to CF card and the metal HD bracket. Those adapters can and do short out the machine, which best case leads to it not booting, but worst case can toast the CF card or the TAM itself. I found that out when I loaded a whole bunch of software on a 16GB card, then after shutting it down and rebooting found the card completely blank. After replacing the card (it tested bad after that) I rigged together an old laptop HD caddy to put something plastic between the CF to IDE adapter and the HD bracket and I was back in business.
| Posted by: ninjafist1 on 2018-09-24 12:35:12
Hey thanks! Well it didn't fit in the hdbracket directly as the screw holes didn't line up. Ended up using some peel and stick Velcro on the adapter and the hard drive bracket to connect the two. This adapter isn't the kind that's like a bare PCB, it's in a plastic case. But duly noted, if I put it back in I will make sure to find a way to make it shielded
| Posted by: haplain on 2018-09-27 07:51:18
Make sure the system OS is blessed... I've found this to be the issue most of the time.
| Posted by: Dog Cow on 2018-09-27 11:50:57
Can it not see my CF card? I vote for this being the problem.
Make sure the system OS is blessed... I've found this to be the issue most of the time. He's getting a black screen, so at this point, it doesn't matter whether his System is blessed or not.
| Posted by: ninjafist1 on 2018-09-30 17:34:06
Got it working everyone! I believe the problem was the extra pin on the adapter, broke it off and voila. Card is now partitioned into two volumes, 7.6.2 on one of them, and 9.1 on the other. Thanks!
| | 1 |
|