68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Mac Classic no boot | |
| Posted by: Popjoel on 2018-09-18 12:25:23 No bong, someone knows what's wrong?  | |
| Posted by: bibilit on 2018-09-19 01:35:29 Caps or worse battery probably. | |
| Posted by: Popjoel on 2018-09-19 01:38:12 Français ? | |
| Posted by: Popjoel on 2018-09-19 01:42:34 The battery is new and the caps of the analog board too. The failure is random, after a few minutes it starts, sometimes .... | |
Posted by: bibilit on 2018-09-19 04:11:56Français ?yes the caps of the analog board too.And the ones on the Logic Board ? | |
| Posted by: Popjoel on 2018-09-19 04:14:59 No! They did not seem damaged. That could be that? | |
| Posted by: bibilit on 2018-09-19 04:39:54 Yes, like all boards of this era, should be done anyway. | |
| Posted by: Popjoel on 2018-09-19 04:45:28 OK I will do it. Another advice? A particular component? While I am there ;-) Thank You bibilit | |
Posted by: bibilit on 2018-09-19 05:42:21Another advice?get the board washed at the same time. | |
| Posted by: Popjoel on 2018-09-19 05:46:21 I'm sorry, I'm using a translator. A recommendation . Un conseil ? | |
| Posted by: Popjoel on 2018-09-19 05:48:33 OK, Thank you. | |
| Posted by: dochilli on 2018-09-19 23:18:53 Check the voltages at the floppy port. Must be 12, -12 and 5 V. Lower than 4.75V will result in a checkerboard screen. But if you recap the AB the voltages shoud be ok. Otherwise you have some other parts on the AB that shoud be replaced.  | |
| Posted by: Popjoel on 2018-09-20 15:37:10 Capacitors replaced, voltage ok. Which components need to be replaced ? | |
| 1 |