68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | ZTerm Data Rate Errors | Posted by: danda on 2015-12-13 08:32:48
Hi,
I have a Macintosh Classic II connected with a Keyspan USB to Serial adapter to a Raspberry Pi running Basilisk II. I have ZTerm running on both of the machines, and am just trying out some communication stuff.
I found that when the data rate (under Settings->Connection) is set to 300, 1200, 2400, 4800, 9600, 19200, 38400 or 57600 on both machines sending data is no problem.
But if I set it to 14400 or 28800, I can only receive gibberish.
Does anyone know why?
| Posted by: Elfen on 2015-12-13 18:08:45
You have other other options on or off - Parity, Even/Odd bit, Asynchronous/Synchronous...?
| Posted by: danda on 2015-12-13 23:04:58
All the settings are the same on both machines. As I said, it works perfectly for some data rates, and doesn't for others, leading me to think that the other settings are correct.
I'll try and upload some screenshots today.
| Posted by: CelGen on 2015-12-14 08:33:37
Frankly if you can do 57600 I wouldn't care about those two speeds as it's essentially double the rate of your "buggy" 28800.
| | 1 |
|