| Click here to select a new forum. |
| PowerBook 5300ce startup problem |
Posted by: toples50 on 2018-04-28 12:38:25
I have a PowerBook 5300ce but does not boot it has stuck the sleep light on.I have tried to reset it but without any luck.
|
Posted by: bibilit on 2018-04-29 00:23:07
Can be a problem in the charging board area.
There is a daughter board where the battery comes in contact for charging purposes, a lot of capacitors in there, if the board is missing or bad, the 5300 won't boot.
|
Posted by: toples50 on 2018-04-29 02:39:57
Its an easy procedure to open it?
|
Posted by: toples50 on 2018-04-29 02:55:45
Many people tells me about faulty clock battery.
|
Posted by: bibilit on 2018-04-29 03:47:25
The 5300 is easy to open.
Remove the Floppy drive and the battery.
There is a couple of screws in the bottom, lift the keyboard, remove the side plastic hinge covers and trackpad.
The battery and Pram battery are on the right, but IIRC the HD should be removed also.
|
Posted by: toples50 on 2018-04-29 04:49:43
And where can I find battery clock replacement?
|
Posted by: Trash80toHP_Mini on 2018-04-29 08:35:29
190/5300 Service Source: http://powerbook.micahgartman.com/ss/ss_190-5300.pdf
Just about any PowerBook documentation can be found there as well: http://powerbook.micahgartman.com/
|
Posted by: bibilit on 2018-04-29 09:57:31
I don't know where you can find a new PRAM battery, IIRC those are not the common ones, but are rechargeables batteries.
|
Posted by: AlpineRaven on 2018-05-01 03:57:27
I think they can run without PRAM battery
Cheers
AP
|
Posted by: toples50 on 2018-05-01 06:21:08
The problem is I don't want to open because I'm not technician guy.I want just to start up the machine...
|
Posted by: AlpineRaven on 2018-05-01 16:15:40
The problem is I don't want to open because I'm not technician guy.I want just to start up the machine... need to open it up to find out why - do you know someone local that can help?
or follow this;
https://www.ifixit.com/Device/Apple_Powerbook_5300
Cheers
AP
|
Posted by: MikeatOSX on 2018-05-10 10:44:59
The PRAM batteries are 2 of these rechargeable VL2330 3V Li-ion coin cell batteries soldered together:
http://www.ebay.com/itm/282827589539
It's hard to find the original already soldered batteries.
|
Posted by: toples50 on 2018-05-14 08:57:57
Thanks guys.Is it worthy to keep the machine and fix it or to sell it?Is it rare the ce model?The hinges are very strong for 5300...
|
Posted by: bibilit on 2018-05-28 08:24:19
This model was the top of the range, i think only had seen one for real.
The Cs and C are common, not the Ce.
The Pram battery is not required to boot, better removed it anyway.
Did you tried the reset switch on the back ?
|
| 1 |