| Click here to select a new forum. |
| Mac SE/30 no sound |
Posted by: TjLaZer on 2018-04-06 10:01:27
Hi,
One of my Mac SE/30's has a problem with no sound. Not even from the phono jack in the back. Works fine otherwise. I did a recap thinking this would solve the issue, it does not. I tested the speaker with a AA battery and I get some feedback so I'm sure it's fine. A few of the caps did leak so maybe there is a dead trace causing the issue. I will upload some pics later today. I would really like to get this repaired and hope someone can help me fix it, even if I have to send it out to get repaired.
|
Posted by: PotatoFi on 2020-06-08 12:14:35
Did you ever figure this out? My SE/30 has been recapped, and has the same problem.
|
Posted by: JRL on 2020-06-17 12:42:04
I also am having the same issue with my backup SE/30 board (no sound whatsoever except a slight crackle through the headphone port at boot). Mine had several missing pads when I got it but I think I’ve patched all of the obviously broken traces.
|
Posted by: blindowl on 2020-06-17 16:18:11
I had the same problem. It turned out to be that one side of one of the capacitors (next to the sound chips) was loose. After I re-soldered it, the sound worked again. It took several rounds before I discovered that it was actually loose...
|
| 1 |