| Click here to select a new forum. |
| Centris 610 no boot |
Posted by: 68k family on 2015-12-02 18:59:08
Well damnit anyway...I've been horribly busy, haven't been here in a long time and I've recently been using my centris a lot lately and it has worked flawlessly.. Until last night. I turn it on and after the boot chime I get the chimes of death - instantly. The monitor never wakes up, no image is displayed. The keyboard posts. The CD rom or floppy are never accessed (ejected)
I disconnected everything and even removed the ram and vram. Same thing. I reseated everything and same story.
Any ideas?
|
Posted by: Macdrone on 2015-12-02 19:34:08
I had to start recapping my pizza boxes a while back. The 660av was first then the 6100's so maybe do a good cleaning and the hair dryer trick to see if you can get it going. That would confirm caps.
|
Posted by: 68k family on 2015-12-03 03:57:06
I had caps done recently - replaced with ceramics I believe. But that's not to say one of those went bad.
|
Posted by: Macdrone on 2015-12-03 11:39:23
probably power supply then.
|
Posted by: Elfen on 2015-12-03 15:50:54
I would suspect the PSU too.
|
Posted by: 360alaska on 2015-12-04 19:00:11
I have a PSU for a c610 if you think it might help. I've been using it as a bench supply so it wouldn't be that big of a deal to part with it...
|
| 1 |