68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Classic II Logic Board issue | Posted by: bibilit on 2018-03-19 06:08:35
I replaced caps in a Classic II logic board a couple of months ago, the Classic II worked ok after that.
Yesterday, the C II refused to boot, the Analog board is Ok and a Logic Board from a Classic works fine.
The C II will display anything from vertical lines to a plain grey screen with no sound nor pointer.
Removing the simm will no change the behaviour.
Can a faulty on-board ram will produce this ?
| Posted by: hfrazier on 2018-03-20 08:42:58
Did you clean the board after re-capping? Maybe the cap goo (if the old ones leaked) spread farther on the board.
Look for a sheen near where you replaced the caps. Also, more dust will collect on top of the goo, which I have noticed is a telltale sign.
... Warm water with some dish soap and a light toothbrusing won't hurt ...
| | 1 |
|