| Click here to select a new forum. |
| Mac SE/30 caps (need tantalum dimensions) |
Posted by: Alex on 2018-02-14 13:44:20
Hi
Does anyone have the tantalum dimensions that I should purchase? I just got an SE30 logic board and want to start removing the old caps and replacing them with tantalums. Would appreciate anyone's help. I only need info for these two:
1 - 1µf - 50V - SMT
10 - 47µf - 16V - SMT
Source: http://www.maccaps.com/MacCaps/Capacitor_Reference/Entries/1989/1/19_Macintosh_SE_30.html
Thanks!
|
Posted by: Realitystorm on 2018-02-14 13:49:31
Had the same issue, finally tracked it down:
1uf are: 0.138" L x 0.110" W (3.50mm x 2.80mm)
47uf are: 0.236" L x 0.126" W (6.00mm x 3.20mm)
|
Posted by: Alex on 2018-02-14 14:30:41
You're a life saver! Thanks a million, I was unable to find this using any of my favorite search engines.
|
Posted by: itdude99 on 2018-02-23 14:50:29
Howdy. This is my 1st post, yay! I am new to soldering and I have never ordered cpacitos before. Does anyone have an idiot proof list of caps I can order. I want the tantalum ones and I just acquired an SE,SE/30 and Classic ii (might have another SE on the way). So far only one SE works but I might as well order the caps now.
Thanks in advance,
Jim
|
| 1 |