| Click here to select a new forum. |
| Does the Performa 630 CD series need to be recapped? |
Posted by: MacFox on 2018-02-11 08:27:27
Hello,
I haven't seen any threads about this particular group of Performas needing a recap, but I wanted to know for sure whether or not these models require a recap.
Thanks in advance.
|
Posted by: MrGasS27 on 2018-02-11 10:46:16
Mh, rarely Performas want a recap, 68k Macs like Macintosh II, Classic or SE and others almost always want a recap.
|
Posted by: Innes on 2018-02-12 07:17:27
I've wondered about this too, mine whirrs away quite happily though and there seems to be a lot more available to buy than other 68k Macs, so I guess a lot more have survived and work well, perhaps in part because the caps are indeed not prone to needing replacements
|
Posted by: Bolle on 2018-02-12 08:16:37
There are electrolytics on the 630 board but I have yet to see any that actually started to leak.
But that situation was the same some years back with the SE/30s and Classics so I would not be surprised that they will eventually start to leak on the 630 boards as well.
I have new caps on all my 630 boards just to be on the safe side.
There are a few heavy leakers in the 630s PSU though and those PSU tend to fail pretty often anyways. So if yours still works new caps might help keeping it alive.
|
Posted by: just.in.time on 2018-02-13 16:51:11
I have a slightly later machine (Power Macintosh 6100). While it is fine, it’s Apple HPV card has leaked at all 8 capacitors on the board. This is a circa 1993-1995 era card.
This weekend I plan on recapping that card, as well as my LC 520 board (my last unrecapped 030/040 era board). In a few weeks I’ll probably recap my 6100. I already have the capacitors in from @trag.
I think we are rapidly approaching the point where anything up to 1995 or so should be considered for recapping.
Analog boards and power supplies on the other hand... haven’t had to touch any of those yet. Though I have a feeling one of my CC ABs are about done and due for a recapping.
|
Posted by: Brett B. on 2018-02-16 10:06:50
My LC630 had no leaking caps the last time I had it apart (year ago maybe?)
I'm sure it's just a matter of time.
|
Posted by: AlpineRaven on 2018-02-17 03:02:14
No I haven't seen an LC630 that needed re-cap... (I used to have 40 of them and already sold off, have kept 6 of them now and they still do work) but I have came across to LC630 that have gone haywire and cannot work out why (that one did replace the caps as last resort but it was dead as)...
Cheers
AP
|
Posted by: Macdrone on 2018-02-25 00:45:22
I have recapped one LC638CD and a 6500 board that had issues booting but up till now its rare. As for 6100's those puppies bleed like the 660 and 840's.
|
Posted by: bilbomacuser on 2018-03-04 08:09:18
I got my Performa 630 out of storage and it rattled. A couple of small SMD capacitors had presumably leaked and fallen off the board. The case was incredibly brittle too, various bits broke - be very careful undoing the clips! I replaced only the capacitors that had fallen off, and it works fine!
|
Posted by: MacFox on 2018-03-06 17:39:42
Thanks for your input everyone. I've always been interested in this series of Mac due to its look and because it is a late 68k machine. I'll keep what you all have said in mind.
|
| 1 |