| Click here to select a new forum. |
| Supermac Spectrum SE/30 and IIsi ROM? |
Posted by: ktkm on 2017-11-27 06:15:16
I would like to know if anyone has gotten this combo to work ”SE/30 with IIsi ROM and Supermac Spectrum SE/30 graphics card”?
As you can can see from the attached clip -- I have no clue whatsoever.
/K
View attachment 21294
|
Posted by: Trash80toHP_Mini on 2017-11-27 07:16:44
I get even worse results with the Radius Pivot II/IIsi in the SE/30 with IIfx ROM or IIsi ROM installed on dougg3's illuminated Jolly Roger ROM SIMM.
Check out BMOW's docs.
SE/30 won't boot with IIsi or IIfx ROM SIMMs - Hacks stalled
|
Posted by: ktkm on 2017-11-30 05:26:56
Thanks Trash!
Do you think it could be the ROM socket? I use a GGLABS IIsi ROM SIMM, and it never cheated on me before? However the board I’m using did have som glitches with BMOW’s ROM-inator II, and I do have another SE/30 board to test it with. As soon as get my new FPM memory (should be in the mail by now) I’m gonna try it again!
|
Posted by: Trash80toHP_Mini on 2017-11-30 06:34:29
Nah, if the original Dirty ROM SIMM works flawlessly the socket's not to blame. ROM-inator II arrived and gave identical "error code" so it's likely the "clean" ROMs across the board. MODE32 may have to do. Its lower OS ceiling doesn't bother me, gotta check with the folks who've reported successes.
When I find its cable or the time to build one I'll check results with the SE/30 version of the Pivot. joethezombie has reported problems with using the RCPII/IIsi in combination with other cards, hrmmm . . .
Thinking along those lines, what OS are you running? Mine's System 7.1 (for any Macintosh) and the etched marking on my board are:
DGC
12VO
21 149S
Bolded number is negative space inside an etched rectangle, so I'm guessing that's a particular run designation?
SE/30 Variables?
Board Revision
Production Date
ROM spec.
OS
other cards installed in combination
. . . same for VidCards in question???
|
Posted by: ktkm on 2017-11-30 12:44:03
Yes, System 7.1 is my all-time favorit! 🙂
Could this be of any help?
My SE/30 spec with Supermac Spectrum SE/30
System: S1-7.1.1 (Swedish)
ROM: IIsi (v124, 512K, GGLABS)
RAM: 69632K (64+4=68MB)
Board: Green
Board number: 820-0260-A
Manufactured in: Cork
Year: 1991
Week: 11
Number: 511
Model ID: 00YA
Other:
PDS: TwinSpark 2.0, Daystar PowerCache 50MHz (P33), Supermac Spectrum SE/30*
*I don’t have it handy in writing.
Tests was carried out with and without the TwinSpark 2.0 and Daystar PowerCache 50MHz (P33), and the results where the same.
Note: Supermac Spectrum SE/30 works with the TwinSpark 2.0, ”dirty” SE/30 ROM and System 6.0.8.
|
| 1 |