68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Dayna Communicard with PB 1400C | Posted by: tendim on 2014-01-17 02:52:34
I recenty acquired a PowerBook 1400C with a Dayna Communicard. I've managed to source the drivers from the Macintosh Driver Museum, and the software installs fine. But when I insert the card, I get a message, "the correct software you need to use your pc card is not installed".
Some notes:
- Running System 7.6
- Driver version 1.2.1
- The PC Card shows up on the desktop
- When I run the diagnostic software that comes with the driver, it recognizes that the card is in the computer (in either slot), and that it is a Dayna card
Has anybody managed to get this card to work?
Thanks,
-10d
| Posted by: Anonymous Freak on 2014-01-17 14:53:11
That was my primary Ethernet card for both my 5300c and 1400c for many years. I'll have to see if I can find the driver disk...
| Posted by: tendim on 2014-01-22 09:24:08
Well, after lots of searching online I found that the Dayna CommuniCard driver v2.2 is included on the Mac OS 8.1 install CD, which I was lucky enough to have in my collection. The driver now works, and the PB1400C is online! 🙂
I'll post up the driver sometime soon for others that run into the same problem.
-10d
| | 1 |
|