68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | AppleVision 1710AV Monitor + KVM Issues | Posted by: CelGen on 2013-05-22 18:31:08
This monitor powers on "when it receives a video signal", however when connected through my KVM it refuses to turn on. Is there any way I can short two pins together and force it on or is it powering on to something else that would point to a faulty KVM?
| Posted by: CelGen on 2013-05-22 20:19:21
Actually, I pulled the KVM apart. It's passive for a few exceptions:
On the three system inputs:
Pin 7 is linked to 10 with a diode
Pin 4 is jumpered to 11
On the Monitor output:
Pin 4 is disconnected
Pin 7 is disconnected
Pin 10 is disconnected
So none of the sense pins are at all attached if that means much.
| | 1 |
|