| Click here to select a new forum. |
| Caps! -- Macintosh Portable /w back light |
Posted by: uniserver on 2013-02-01 23:42:38 This LB seem's a little strange compared to the non back light one.
4 - 1uf-50v
2 - 10uf-16v
1 - 220uf-25v
4 - 47uf-16v
1 - 4.7uf-25v
2- 470uf-25v
4 - 100uf-25v

|
Posted by: Macdrone on 2013-02-02 14:26:01 Ya I read some where it had a bunch of differences.
|
Posted by: uniserver on 2013-07-09 02:14:37 Be careful in this area: ** For only the m5126 **

For some reason they ran traces literally right next to and in between the pads, just like how they did with the se/30,
so be very careful your caps are on square and do not over solder. Or else you will end up with a solder bridge
and Insto-sad-mac when you power it on.
Also keep in mind, Insto-sad-mac can still be from more serious issues.
|
| 1 |