68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Be careful with SCSI adapters! Just fried my HDD. :( | |
| Posted by: olePigeon on 2012-12-09 21:19:29 I just fried my new Ultra320 drive. 🙁 I found a different adapter and thought I'd give it a try. It looked more sophisticated (had 2 SCSI connectors instead of just 1), but it just ended up frying my HDD. It now longer powers up. Argh! Just a warning. Fortunately the drive only cost me $6. I'll see if I can find another one. | |
| Posted by: Unknown_K on 2012-12-10 11:59:11 Is that card HVD or just marked Differential? | |
| Posted by: olePigeon on 2012-12-10 18:52:45 I... don't know. I'd have to look. | |
| Posted by: olePigeon on 2012-12-10 19:57:04 The card is LVD. initio NI-A100U2W Miles U2W SCSI card. | |
| Posted by: Unknown_K on 2012-12-10 21:14:14 Odd then, should have worked unless the HD is HVD. Was the drive working before? | |
| Posted by: CelGen on 2012-12-10 23:40:18 When I got my SGI Onyx the last owner that all hell had broken loose previously when an LVD drive was attached to the HVD scsi bus. Blew up the drive, blew up the SCSI controller and worse yet, killed the IO4 board. Nasty stuff. | |
| Posted by: olePigeon on 2012-12-11 08:28:54 It's an Ultra320 SCSI drive. From what I understand, it should be LVD. I can take a picture of the adapter I used so you can see what the difference is. The plain Jane adapters had nothing special on them, just a resistor or two, and you can see the traces that reroute the power to the molex connector. Worked fine. The one I tried actually had some other chips on it, looked fancy. The HDD worked up until I plugged the fancy adapter in. After that, it would no longer power up. | |
| Posted by: olePigeon on 2012-12-12 11:11:11 Here's a picture of the adapters. The top one is what killed my HDD (or at least, my HDD stopped working after I used it.) The bottom one is the generic adapter that I bought that was working fine previously.  | |
| Posted by: Unknown_K on 2012-12-12 14:30:17 I wonder what those chips are for on the board? | |
| Posted by: olePigeon on 2012-12-12 18:47:02 Well, I thought it looked neat and thought maybe it was self terminating. It's just that I didn't expect it to terminate my HDD in a different way. 😱) | |
| Posted by: Bunsen on 2012-12-12 19:55:54 Probably power regs or termination. | |
| 1 |