68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Mac SE No video | Posted by: RCW on 2015-09-03 20:02:52 I bought a Mac SE on Ebay, but when it arrived the box looked very bad it has no video. 🙁
The display makes a crackling sound specifically the little tube behind the deflection yoke (That tube is also sparking inside), but the machine still gets the boot tone and starts accessing the hard drive.
I had noticed the small board connected to the back of the CRT appeared to be party not pressed down onto the pins.
- I pressed it back into place gently and tried it again.
- The screen still has no video, but makes the hairs raise on your arm now so I know it's getting charged.
- It is also now rebooting continuously due to the boot chime playing repeatedly every few seconds.
I really want to make this thing work. I wanted one since I was a kid.
Do I need to replace the CRT? I have a working crt from a mac plus.
Can anyone tell me what may be wrong here?
Thanks!,
Thomas
| Posted by: CC_333 on 2015-09-08 13:20:56 It does sorta sound like the CRT is bad, but it could also be an analog board problem.
c
| Posted by: techknight on 2015-09-08 15:51:39 crackling sound = not good and usually will kill something if something isnt already blown. If the neck was shooting lightning bolts, or glows blue, the CRT was broken in shipping.
| Posted by: uniserver on 2015-09-08 16:50:30 yep cracked crt
| | 1 |
|