68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | PDS IIe Card schematic | Posted by: hellslinger on 2015-07-21 21:51:14
Hi Everyone,
Does anyone have an LC/PDS IIe card schematic? I have a card that gives me the "defective" error message, despite recapping it and resoldering all the PDS pins (thanks to a certain post on this website).
| Posted by: uniserver on 2015-07-21 23:06:26
you have to wiggle the pins and pull on them, they rot out at the base, sometimes the plastic of the connector bites on the pin pretty good causing you to think the pin is mechanically solid, when its not. also wash the card in hot water with soap and a tooth brush. then hot rinse, then compressor dry.
also sometimes if the software is wrong version or is partially installed from a drag and drop, it can also say that its defective. re install the software.
| Posted by: hellslinger on 2015-07-22 10:04:19
I'll double check those pins. I think the card is in need of washing.
I'm using the card in an LC 475 with a replaced 68040. It's running System 7.1, and I ran the 2.2.1 installer. Does that sound OK?
| Posted by: uniserver on 2015-07-22 11:28:09
you really want to keep the IIe card with computers like the LC, LC-II and Color Classic.
The card needs the system to be in 24bit mode.
http://www.mug.jhmi.edu/mirrors/InfoAlley/1196/15/apple.html
| | 1 |
|