68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
IIci floppy drive issues
Posted by: JRL on 2009-08-25 19:17:27
So the floppy drive on my IIci is acting up.

When I insert a good boot disk, it just sits there with the "?". No X, no "This installer will not work with this Macintosh", etc. What is wrong? Thanks!

Posted by: Scott Baret on 2009-08-25 23:23:23
What version of the system is it? A IIci needs at least 6.0.4 to run.

It could be that the startup disk was made for a particular Mac model. If you made it for, say, a Plus, it will only work on a Plus. Try using an original disk or use one of Apple's disks from their site (I'd use either the 7.0.1 disk tools floppy or the 6.0.8 System Startup disk).

Posted by: JRL on 2009-08-27 19:29:36
It's a customized 6.0.8 bootdisk I made. The 6.0.8 folder on that disk is from 6.0.8 Disk 1. I will try other disks though.

Thanks!

Posted by: JRL on 2009-08-29 20:52:21
Turns out that it works again. 😀

1