| Click here to select a new forum. |
| Farallon Ethernet Card Installer 2.3 |
Posted by: JRL on 2009-08-21 16:33:34
Would anybody happen to have this? Thanks!
BTW, the Mac Driver Museum link leads to a non-existent FTP.
-JRL
|
Posted by: protocol7 on 2009-08-21 16:50:23
Here you go:
ftp://ftp.netopia.com/pub/software/drivers/FENI2.3.sit.hqx
|
Posted by: JRL on 2009-08-21 17:05:46
Thanks, exactly what I needed! The Netopia site is a pain to navigate.
|
Posted by: protocol7 on 2009-08-21 17:20:31
NP!
I just googled the filename from the dead FTP link and that was the first hit. So I didn't have to try and navigate the site 🙂
|
Posted by: Cosmo on 2011-11-22 11:02:38
Seems to be dead now. Anybody with the file saved?
Farallon 8960155-00-02 Rev:03. PCI ethernet.
|
Posted by: protocol7 on 2011-11-22 11:24:50
Seems to be dead now. Anybody with the file saved?
Farallon 8960155-00-02 Rev:03. PCI ethernet. That would be me 🙂
http://www.multiupload.com/13Y310ZOHH
|
Posted by: Cosmo on 2011-11-23 09:46:38
Thanks! Still, no luck. The card is not been recognized by OS8.1 🙁 Can't choose Ethernet from TCP/IP settings. Am i doing something badly wrong, or just, an dead card?
Tried another PCI-socket, no dice.
|
Posted by: ojfd on 2011-11-24 06:47:33
Cosmo.
It appears that yours is PCI card, but that installer is for NuBus cards.
Does it look like this one
http://tinyurl.com/bsyc2zo
I did a bit of research, and it looks that Farallon is long gone and MacOS drivers are really hard to find. The only place I could find is this one, so go and grab them:
http://www.netrom.com/~john/tgs/macstuff/
If it goes down, PM me, I've already collected them.
|
Posted by: Cosmo on 2011-11-25 13:29:04
Thanks a million! If the file actually is this one: PN996v1.1.sit.hqx, it seems to be around still quite a bit luckily. Downloaded it and let's see if it works. Can't boot the machine right now, everybody would wake up :b&w:
|
Posted by: Cosmo on 2011-11-26 02:45:34
That was the correct driver, works like a charm now! Thanks!
|
| 1 |