68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | How to test power supply | Posted by: motion on 2009-03-21 05:48:03
hello
i've found some old apple II parts with 3 power supply inside cases and 2 others one "alone"
should i test them with the ATX pc way, putting a cable between green and black cable with multimeter on 20V and nothing else plug on it ??is there any risk to "burn" power supply ?
thks for info, if you want to see all the apple II pieces i sell on ebay, you can check my sell page there :
http://informatique-pda.shop.ebay.fr/items/Ordinateurs-de-collection__W0QQ_catrefZ1QQ_flnZ1QQ_sacatZ113186QQ_ssnZstefmozQQ_trksidZp3911Q2ec0Q2em282
i'm from france but will ship worldwide with the lowest cost for your country 🙂 i think start prices are very reasonnable, look at them
| Posted by: Dog Cow on 2009-03-25 15:23:32
The Apple II power-supply is fairly "intelligent". If it detects a no-load situation (that is, nothing is taking the electricity), it will short-circuit itself indefinitely. This will come out as a rapid clicking noise, which is quiet, but can still be heard. Likewise, if there's ever a short circuit, the power supply will shut down for a moment, then attempt to restart. If the short-circuit condition is never removed, this cycle will happen indefinitely, producing the same rapid clicking sound as before.
| Posted by: motion on 2009-03-26 06:05:16
thanks for this info, so i can just plug power supply "alone" and if i heard the noise, that means power supply works ?? i can do it with no risk to damage power supply ??
i want to be sure i can do that and don't burn it 🙂
| Posted by: Dog Cow on 2009-03-26 07:50:37
thanks for this info, so i can just plug power supply "alone" and if i heard the noise, that means power supply works ?? i can do it with no risk to damage power supply ?? Well, the best test is to plug the power supply into an Apple II, but if you hear the clicking when the power supply is not plugged in to an Apple II, then that is a decent test as well. You shouldn't damage the power supply, but don't leave it on for a long time, just a few seconds.
| Posted by: motion on 2009-03-26 12:57:39
ok thank you 🙂
| Posted by: Charlieman on 2009-03-28 09:03:03
I always use a hard disk -- one that is usable but disposable -- for 12V and 5V testing. It is easy to make a test cable (with tapping points to measure voltages) from salvaged wiring and the disk almost always draws enough power to start up a switched mode PSU.
| | 1 |
|