68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Question about Performa 630CD & DOS Compatibilty | Posted by: Richard on 2008-12-28 15:18:22
Can a normal Performa 630CD be turned into a DOS Compatible Performa 630CD with a card, or did those models have something special about their motherboard that the normal 630CD does not? If this is possible, what card would I need? Are they common?
| Posted by: Charlieman on 2008-12-28 15:54:03
No. A special logic board is required. They are not common where I live (UK) but elsewhere may be different.
| Posted by: LCGuy on 2008-12-28 23:54:43
The easiest way is to, as Charlieman said, to just buy a full, complete LC630 DOS board.
The logic board used in the LC630 DOS is not "special", but rather, updated. It uses the exact same board as the LC580, which has two SIMM slots, and the Apple Internal Video Connector, which is used to provide external video out on the 580 (with a very hard to find adaptor cable), or to send video from the LC630 DOS board to the display on the LC630 DOS.
Either way, you'll still find it a lot easier to simply track down a full LC630 DOS board rather than just the bare card, not to mention that to use the card, as well as needing the card, you'll need the video adaptor, the sound card, and the gameport/LC PDS adaptor, all of which you'll only be able to get from an LC630 DOS Compatible.
| | 1 |
|