68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
Differences between the B&W and Yikes! Heatsink
Posted by: filipetolhuizen on 2008-02-18 22:26:36
Are there any differences between those 2? I just tried the voltage tweak to make my brand new G4 ZIF 400 run at 500mhz but it failed. The machine freezes a few seconds after boot, or during it, sometimes with bomb error messages. I followed exactly this: http://xlr8yourmac.com/G4ZONE/G4YIKESOC/500MHz_yikes.html

but it failed. However I succeeded with a G4 zif 350 to run at 450mhz with the same voltage tweak.

Could it be because the B&W has a different heatsink from the "Yikes!"? Mine is a B&W using the G4 zif module from a Yikes. Any help is appreciated.

Regards,

Filipe

PS.: I already have extra cooling added (2 additional fans attached to the heatsink and thermal grease)

Posted by: ~llama on 2008-02-27 14:57:04
If it worked with the 350 but not with the 400, I'd say the problem is probably with the 400 chip rather than the ZIF or the heatsink. I suppose it could be a problem, but not likely since you already have additional heatsink fans.

[EDIT] Really, you may as well get a Sawtooth on eBay--they're dirt cheap these days. I have a 500MHz Sawtooth that I absolutely love.

Posted by: filipetolhuizen on 2008-02-27 17:00:31
Really, you may as well get a Sawtooth on eBay--they're dirt cheap these days.
Not only they still extremely expensive in here, but also I need Mac OS 8.6 and would be harder for me to flash agp cards.

Posted by: ~llama on 2008-02-27 17:18:02
That is true. I always forget the Yikes! doesn't have AGP... but you're chipping a B&W, right?

Posted by: filipetolhuizen on 2008-02-27 17:26:03
but you're chipping a B&W, right?
That's right!

Sometimes I see some used Sawtooth with low prices, but it depends on the vendor and normally is out of town, so there's the high shipping cost and no OS 8.6 [🙁] ]'> . Some people think because it's a mac that they can get 200% profit on it even if it's an obsolete model. I've seen some people selling Classics for about US$ 700 in here (converted from our $ unit). [:O] ]'>

Posted by: Christopher on 2008-02-27 18:59:30
I see 500Mhz iBook G3's going for $250 or more. Same with some of the upgraded iBook Clamshells.

Are the CPU cards expensive too in your area?

Posted by: filipetolhuizen on 2008-02-27 19:02:27
Are the CPU cards expensive too in your area?
Not really, but they are way rare to find. This G4 400mhz zif I got on e-bay. I could not find one in the whole country. Even complete Yikes! are not found in here.

1