68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
SCSI CD recorder for Performa 6116
Posted by: Dimitris1980 on 2015-01-28 01:47:39
Hello,

i would like to change my apple internal 4x scsi cd rom on my performa 6116 with a fast cd recorder. I would like fast reading speed, not (necessarily fast writing speed) and to be able to boot from the drive. Any suggestions?

Posted by: olePigeon on 2015-01-28 08:48:35
Well, unfortunately SCSI CD-RW drives are ridiculously expensive right now.  However, I did find this:

http://eshop.macsales.com/item/Hewlett%20Packard/C6020I/

Now it's not super fast.  It's only 6x read and 2x write, but it is advertised as Mac Bootable, it's brand new, and it's only $13.

It doesn't have a bezel, but that should be find since you're installing it internally in your 6116.

Posted by: johnklos on 2015-01-28 23:59:10
It's hard to beat $13. On the other hand, if you get a SCSI to IDE adapter (and possibly an IDE to SATA adapter, too), you can use pretty much any new DVD or Blu-Ray drive out there.

Posted by: Macdrone on 2015-01-29 08:04:03
But newer drives would not be bootable for certain.

Also drivers for newer drives would need a third party driver and may not work well, or at all.

Posted by: techknight on 2015-01-31 04:08:28
And dont forget your SCSI to IDE/SATA adapter must support the ATAPI extensions which most do not. 

Posted by: johnklos on 2015-02-01 00:33:52
Acard adapters work fine, and anything newer than a certain age will work with pretty much any software. I used an IDE DVD burner as a bootable drive for a Quadra 800 via an Acard adapter (UW-SCSI to IDE with UW to narrow adapter), and although I didn't try booting, I did connect a SATA Blu-ray burner to that same machine and it mounted CDs and DVDs, although it wouldn't mount Blu-ray discs.

Posted by: IPalindromeI on 2015-02-01 06:46:39
Does the classic Mac OS support UDF? That'd be needed to read BR.

Posted by: Macdrone on 2015-02-01 14:29:42
Some system versions support UDF.

Posted by: LazarusNine on 2015-02-28 17:30:56
I have a similar question, though as I won't be running OS 8.6 or higher, I'm not sure olePigeon's recommended drive from OWC is a solution for me. I may need to swap out the SCSI CD-ROM drive in my Performa 630 (hopefully running OS 8.1 eventually). Can I replace it with pretty much any SCSI CD-ROM drive or must it be one that is specifically Apple-blessed? Thanks in advance.

1