68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.

Duo Dock PSU Repair/Recap

Posted by: mitchW on 2015-01-13 11:48:08 I recently did a repair of Duo Dock which had the "click of death", as it made clicking noises when plugged in. The main culprit is the PSU, where few electrolytic caps dry up or leak, and the PSU won't start. The PSU is riveted together, so you must drill out the rivets to gain access. Someone suggested replacing the C28 or something, but I found more dead caps by measuring ESR, also there was one leaking SMD cap, which is easy to overlook. I needed to desolder one of the filter caps to gain access. These filter caps looked good, and also measured okay, so I left them in. After replacing all of these caps, the Duo Dock now runs fine. For reference, I drew up a diagram of the caps I replaced.

Posted by: Elfen on 2015-01-13 13:04:37 Interesting. Need more labels on the images to see what you replaced. This brings hope for many with dead Duo Docks.

Posted by: mitchW on 2015-01-13 14:09:04 I replaced the items marked in boxes, so total of four capacitors. I hope that the diagram is clear enough. 2x 100 uF 25V at C24 and C28 1x 47 uF 25V at C31 1x 33 uF 25V SMD at the vertical PC board That's it, about two hours worth of work.

1