| Click here to select a new forum. |
| What I've received as of late... |
Posted by: slomacuser on 2022-02-21 01:43:39
View attachment 38679
The CDU-561 installed. Due to it being a caddy loader, the bezel tends to pucker out a bit. Basically a temporary install until I can get the matching drive for the bezel. I can trade you caddy bezel for tray one? |
Posted by: volvo242gt on 2022-02-21 02:15:06
I can trade you caddy bezel for tray one? I'm actually planning to install a tray loader drive. They're typically faster anyway. That, plus I could use the drive I have for my SE, mounted in an external ZFP case, while I use the CD-R drive I have as a CD-ROM drive for my IIci.
Thanks, though. |
Posted by: joshc on 2022-02-21 02:27:07
@volvo242gt your collection is coming together nicely, what's next? |
Posted by: volvo242gt on 2022-02-21 12:09:29
@volvo242gt your collection is coming together nicely, what's next? I'm hoping to conquest an SE/30 and a IIfx, maybe an Apple IIgs system as well. Do need to source a couple extra ADB keyboards and mice, plus a M1212 monitor, since the Dell LCD doesn't really place nice with Macs that use SOG (sync on green). |
Posted by: CC_333 on 2022-02-21 16:38:24
Do need to source a couple extra ADB keyboards Do you care what kind?
I have a couple Apple Design keyboards I'm thinking of parting ways with....
c |
Posted by: volvo242gt on 2022-02-22 00:14:36
Do you care what kind?
I have a couple Apple Design keyboards I'm thinking of parting ways with....
c Already have one of those... lol ;-) Use it with the G3, since it's better than the A1048 I was using. Looking more for a M0116 and a M0487 or a couple M0116's. |
Posted by: volvo242gt on 2022-02-23 18:29:42
Looks like I just conquested an A9M0106 that looks to have been converted into a G7287 SuperDrive. I don't recognize the handwriting on the bottom of the case, so I don't think it was one that I converted, but who knows... Will come in handy for installing software on the SE until I either fix or replace the drive inside it. |
Posted by: volvo242gt on 2022-02-25 12:24:00
Later Monday or sometime Tuesday, I should have a M1212 monitor coming from Montana by way of my brother-in-law, who is picking it up on his way back home from visiting his parents. May also be receiving a M0116 keyboard for the SE... |
Posted by: alectrona6400 on 2022-02-26 10:08:19
Does that 68040 chip work? |
Posted by: volvo242gt on 2022-02-26 10:51:18
As soon as I find where I put my thermal paste tube, I'll be able to swap it in. I suspect it'll be fine. |
Posted by: volvo242gt on 2022-03-01 22:09:40
Ah, much better... Phone's camera doesn't really care for the 67Hz refresh rate, but, got normal color finally. Second photo shows all three color Macs here (two of them off). |
Posted by: alectrona6400 on 2022-03-02 07:00:14
I spot some strange looking G4/G3... I dig that. |
Posted by: volvo242gt on 2022-03-02 12:24:57
I spot some strange looking G4/G3... I dig that. Yep, a B&W G3 with the clear G4 plastics on it. Was easier to place the computer sideways on the desk, since it gives me enough room to use the mouse I have attached to the MBP, while still letting me pull the monitor forward and use the G3's keyboard when I need to. |
Posted by: volvo242gt on 2022-03-10 00:41:19
A9M0106 finally arrived. Needs help. IIci also arrived. Again, floppy drive needs help. From RE-PC, I picked up a hard drive power extension harness, a power cord that'll let me plug the Dell monitor into the passthrough connector on the G3's power supply, an Adaptec APD-29160N, and a Linksys WMP54G wi-fi card. Friday, another IIci may come home. One with better plastics. |
Posted by: alectrona6400 on 2022-03-10 05:49:48
Yep, a B&W G3 with the clear G4 plastics on it. Was easier to place the computer sideways on the desk, since it gives me enough room to use the mouse I have attached to the MBP, while still letting me pull the monitor forward and use the G3's keyboard when I need to. I have a rough looking QuickSilver case around. Could use the plastics on that to make something similar with my QS2002. |
Posted by: volvo242gt on 2022-03-10 10:23:45
I have a rough looking QuickSilver case around. Could use the plastics on that to make something similar with my QS2002. Go for it. That said, I'd be tempted to find some G3 plastics for the sides, to give it some Bondhi Blue mixed in with the silver... |
Posted by: Trash80toHP_Mini on 2022-03-10 19:05:42
G3's Blueberry, no? Bondi was about the worst color Apple ever shipped. 8-b |
Posted by: volvo242gt on 2022-03-10 23:50:49
Bondi. Kinda that torquoise blue of the "Post reply" button. ;-P |
Posted by: alectrona6400 on 2022-03-11 06:11:35
I honestly liked the Bondi Blue color. It's a good shade of teal. Personally my other favorites were Grape, Lime, Tangerine, Ruby, Indigo, Graphite, Flower Power, and Strawberry. Snow looked somewhat uncanny to me. |
Posted by: volvo242gt on 2022-03-11 21:42:17
Yeah, I don't mind it... |
| < 6 > |