68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| BeOS PowerPC Software and GoBe Productive | |
| Posted by: lolo799 on 2024-04-07 05:44:06 Here's a screenshot:  And the translated quizz from BeaCon 1, the original file is at Japanese support in BeOS 5 is all broken... All the BeaCon reports: | |
Posted by: mg.man on 2024-05-06 09:50:42I've started collecting together information and resources for PowerPC BeOS...I'll 'contribute' this...  Woo woo!! 😎 Taking advantage of the BH, I finally got 'round to cleaning up a PM8500 I picked up a few years back, and popped in an Interware (Daystar) dual 604e card I picked up off buyee specifically to play around with BeOS. Thanks to your guide and image(s*) I'm now underway. I thought I was going to have to remove some RAM, but, as you can see, Be seems to be happy with it!! I did get an error about the network interface not initialising, so will need to figure out how to sort that out. Also (see the '*' above), it took me some head-scratching and poking 'round the "Getting Started" document to figure out how to launch... 🙃 So it might be worth mentioning the "Tools" .hda in your Installing section where you point to the pre-made .hda. 😉 Of course, you can always leave it as is to see who "passes" and who doesn't!! 🤣 All in - happy bunny here! Thanks for giving us an "Easy" button! 👍 | |
Posted by: mg.man on 2024-05-06 10:13:27I did get an error about the network interface not initialisingFigured it out... your .hda had a 2nd (PCI) interface configured. Of course, I don't have one... removed it and all's well!! Thx again! | |
Posted by: lolo799 on 2024-05-06 12:24:08I'll 'contribute' this...Nice setup! Are you using a pci graphic card or the onboard chip? | |
Posted by: mg.man on 2024-05-06 12:36:33Nice setup!Cheers! Are you using a pci graphic cardJust the onboard - I don't have many PCI graphics cards - mainly NuBus. I do have a Mac Radeon 7000, but not sure Be will support it? | |
Posted by: lolo799 on 2024-05-06 14:23:35Cheers!I think I have that card, it works but won't run fullscreen apps iirc. Best way to test graphic cards support for different modes is Doom. | |
| Posted by: dr.zeissler on 2025-04-19 05:58:03 My 7300 just works, even if it has a G3/500 processor in it. Compatibility seems to be to the board, not the CPU. My G3 Desktop, B&W and the later stuff seems to be not working for BeOS 5.x I downloaded. But the onboard video seems to be a bit slow/sluggish, so I am thinking about getting out my QD3D PCI card and put something different in it. What would you install? I think I have several PCI cards here....from Mach64/AtiRage/Voodoo Banshee/Voodoo3. I think the VT MP 750 (banshee) would be a good choice, hopefully it is supported by BeOS. btw. was Rhapsody ever installable on such a early PPC Mac? Doc | |
| Posted by: lolo799 on 2025-04-19 11:10:45 Yeah it only works on PCI old world Powermac and clones. Ati Rage pro should work fine and there's a 3rd party Voodoo3 ppc driver on falconfly. BeOS PowerPC Video CardaHi. If anyone here has experimented with video cards that work both in MacOS and BeOS, can you share which card and how well it worked in BeOS. - does it break any applications? - Can you adjust resolutions and refresh rates in the Screen setting? - Boot Screen? - Any other weird graphical...
68kmla.org
| |
| Posted by: olePigeon on 2025-04-24 09:44:39 There's an incompatibility with the 8600 & 9600 for some reason. CPU won't run faster than 100 MHz or something like that. I can't quite remember what the limitation was. Would be cool if someone could somehow update it and patch it to run G4s and G5s. Haiku just isn't the same. 🙁 | |
Posted by: CC_333 on 2025-04-26 16:28:09Would be cool if someone could somehow update it and patch it to run G4s and G5s. Haiku just isn't the same. 🙁I wonder if any of the source code still exists anywhere? c | |
| < 4 |
