| Click here to select a new forum. |
| SE/30 with simasimac and happy chime |
Posted by: AstroFirebird on 2023-09-13 15:40:39
What would cause no activity on the VIDW line at UE6? |
Posted by: AstroFirebird on 2023-10-04 21:17:23
For anyone from the future that may have this problem, UJ6 was the culprit. I replaced it and now have a fully functioning SE/30. |
Posted by: zigzagjoe on 2023-10-05 06:02:51
For anyone from the future that may have this problem, UJ6 was the culprit. I replaced it and now have a fully functioning SE/30. NIcely done!
Not that one I'd have expected since it seemed to test fine... |
Posted by: imactheknife on 2023-10-05 17:00:40
NIcely done!
Not that one I'd have expected since it seemed to test fine... Might have been a bad solder joint. I have had to remove chips and clean legs and pads to regain proper connection again. At a glance, they looked fine, but removing and cleaning solved problems too. Mostly due to cap juice etc |
| < 3 |