| Click here to select a new forum. |
| Macintosh SE/30 logicboard recreation (thread revival) |
Posted by: WillJac on 2024-12-08 12:58:08
Suggest doing the same for the 3 small PLCC's also as they difficult to solder if no socket is used. Thanks for the update on the board as this is much appreciated. |
Posted by: obsolete on 2024-12-08 15:59:25
I agree, the PLCC-20 footprints are rather small. Thanks Bolle! |
Posted by: Doctor69 on 2025-07-09 00:27:54
Hello, I managed to buy new se/30 motherboard made upon r5 Gerber files. Now they're asking for the centroid file for the bottom side. do you know if there's one I can upload? Thank you in advance |
Posted by: cheesestraws on 2025-07-09 00:45:03
Hello, I managed to buy new se/30 motherboard made upon r5 Gerber files. Now they're asking for the centroid file for the bottom side. do you know if there's one I can upload? Thank you in advance
Pretty sure the centroid file is just another name for the pick and place file. |
Posted by: Doctor69 on 2025-07-09 01:25:22
Yes, I Think so but Where can I Find It? |
Posted by: Doctor69 on 2025-07-09 01:35:36
Is there a pick and place file for the top side too? |
Posted by: cheesestraws on 2025-07-09 01:43:31
Yes, I Think so but Where can I Find It?
They're in the github repo AFAIK. |
Posted by: Doctor69 on 2025-07-12 01:14:20
Hello, can someone help me checking the correct positioning of these components on rev5 Bolle's SE/30 board? thanks in advance
PCBWAY, to whom I ordered the boards asked to check if everything is OK but I'm no technician. |
Posted by: croissantking on 2025-07-12 03:37:47
Hello, can someone help me checking the correct positioning of these components on rev5 Bolle's SE/30 board? thanks in advance
PCBWAY, to whom I ordered the boards asked to check if everything is OK but I'm no technician. Looks good to me. |
Posted by: Doctor69 on 2025-07-12 03:47:11
Looks good to me. Thanks a lot! |
Posted by: wottle on 2025-07-12 06:30:19
Hello, can someone help me checking the correct positioning of these components on rev5 Bolle's SE/30 board? thanks in advance
PCBWAY, to whom I ordered the boards asked to check if everything is OK but I'm no technician. Looks like they scratched the board around L11. May want to confirm the traces there weren't damaged. Or see if they can replace it. |
Posted by: Doctor69 on 2025-07-12 12:21:17
Looks like they scratched the board around L11. May want to confirm the traces there weren't damaged. Or see if they can replace it. I ordered five of them, anyway I'll report it and hope they will replace that board
. Thanks |
Posted by: Doctor69 on 2025-07-31 10:58:44
Please, can Someone help me finding the web page with the mouser cart to populate a mac se/30 reloaded? I used it to buy some components but now I can’t find it again. Thanks |
Posted by: croissantking on 2025-07-31 11:02:49
Please, can Someone help me finding the web page with the mouser cart to populate a mac se/30 reloaded? I used it to buy some components but now I can’t find it again. Thanks Link to my SE/30 Reloaded cart |
Posted by: finkmac on 2025-07-31 11:04:29
there's two BOMs on google docs too
this one is rather detailed but geared towards uk/euro ordering
this one has better digikey/north american parts links |
Posted by: Doctor69 on 2025-08-01 02:00:04
Thanks, very helpful |
Posted by: Doctor69 on 2025-08-01 02:01:25
Anybody knows if I can program chips with jed files using a Mac? And if yes any suggestion about the harwarr to be used? |
Posted by: croissantking on 2025-08-01 02:02:30
Anybody knows if I can program chips with jed files using a Mac? And if yes any suggestion about the harwarr to be used? You mean for the PAL chips? I did mine with a T48. |
Posted by: Doctor69 on 2025-08-01 02:16:54
Ok, is any adapter needed? Yes, and what about the software? command line. Sorry but it's the first time for me. I'm a veterinarian and electronics is just a hobby |
Posted by: croissantking on 2025-08-01 03:06:22
Ok, is any adapter needed? Yes, and what about the software? command line. Sorry but it's the first time for me. I'm a veterinarian and electronics is just a hobby No adapter needed for the DIPs but one is needed for the 20-pin PLCC at UH7. This might come with the T48 but it depends on which bundle you choose when you purchase it. It can be obtained separately if not.
I use the Windows software that comes with the programmer - it’s got a GUI - this is probably the most convenient. |
| < 27 > |