68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
My Latest ...
Posted by: mcdermd on 2013-09-20 11:06:35
:/

I know the 21" color cable works with the 21" monochrome monitor but not the other way around. I was hoping the portrait would be the same story as the 21" mono. I actually passed up an early color 21" a while back because the case plastics were all cracked and broken.

Oh well. Maybe I'll have to break down and buy the NuBus card to sue with a straight 13W3 cable.

Posted by: mcdermd on 2013-09-20 11:10:59
I think it will work, according to this page:

http://support.apple.com/kb/TA44937?viewlocale=en_US

Cable Part #: 590-0615Used on: Portrait Display, Two-Page Display
Posted by: Macdrone on 2013-09-20 13:59:58
Damn isaw a cable at free geek and didn't pick it up a week ago. Ill try and get a day and go look again. I'm so sorry, been working a lot lately.

Posted by: Trash80toHP_Mini on 2013-09-20 14:10:47
I'm pretty sure my cables are from Griffen, their tech support was fabulous. The guy gave me the pinout changes to make and it worked like a champ. I've still got it, but a couple of the wires came loose. They shouldn't be too difficult to noodle out.

Posted by: mcdermd on 2013-10-10 23:10:49
Been having a hard time scoring anything recently. I broke the dry spell with a 12" PowerBook G4 in the box with all the stuffings for $25. It works but is missing a battery and in fairly dirty shape.

I also managed to get a PowerMac 6500/250 from a guy I know. It is in fairly good snap with a bad Zip drive and a broken tab on the logic board back plate. Anyone have a 6x00 back plate with both tabs?

Posted by: TheMacGuy on 2013-10-10 23:19:33
Nice job on the PowerBook! I spent around $100 after getting mine all working. And you got the box too!

Posted by: mcdermd on 2013-10-13 18:45:40
I touched bases with my friend today and brought home a IIx, a IIfx, a Platinum Mac Plus (with the box, manuals, inserts, software, etc), a boxed Ethernet CS card, a new, sealed external Apple SuperDrive floppy drive, System 7.0.1 floppies, stickers, etc.

I guess with the SuperDrive being sealed, I'll get a look at what Platinum looks like brand new 😉

Posted by: NJRoadfan on 2013-10-13 18:54:20
Do tell us what version it is. I have the one that has the amber activity light. Others come with a red activity light like the 800k drives but have "FDHD" silk screened on the front.

Posted by: mcdermd on 2013-10-13 19:16:26
I opened the box and it does not have any "FDHD" or "SuperDrive" silkscreen. I'll have to plug it in tomorrow and check the light but from the sounds of it, the LED should be amber. It's pretty cool to open a brand-new, vintage item. I think this was a first for me.

Posted by: volvo242gt on 2013-10-13 19:56:16
Most of the external SuperDrives I've seen (either in magazines or in person) have had the amber LED. With or without the silkscreened badging. So, I suspect that it will be amber...

-J

Posted by: NJRoadfan on 2013-10-13 21:47:13
Apple sold these drives fairly late, I recall seeing them in a 1992 catalog a I had for $400. I wish I had that catalog still... :disapprove: I don't think it sold all that much to Mac users given how few machines actually had a floppy port and the SWIM chip. Most were likely sold for the setup I use, namely on an Apple II equipped with the Apple FDHD controller.

Posted by: volvo242gt on 2013-10-13 22:09:00
Yup, which, like the Liron card, is like hen's teeth. If I had one, I could use the modded A9M0106 to its full capabilities on the //e...

-J

Posted by: mcdermd on 2013-11-08 14:26:36
Picked up an LC550, Imagewriter I and a 3GB M2115 hard drive on lunch today.

Posted by: volvo242gt on 2013-11-08 14:47:02
Not bad...

Coming down tomorrow for you is:

Mac Quadra 660av 40/3GB/CD with 8.1

Mac IIci 6/40 with Radius Color Pivot interface card and 7.0.1

Personal LaserWriter NT

and a Radius Color Pivot LE

PM me if there's anything else, that way I don't forget to load something up this evening...

-J

Posted by: Macdrone on 2013-11-09 02:15:01
You get a chance to look at my 550 board?

Posted by: mcdermd on 2013-11-09 10:43:02
OMG, I totally forgot about it, Jason. Big apologies to you. I need to make a cap order this week. I'll grab the board and start prepping it.

Posted by: Macdrone on 2013-11-09 11:05:49
No worries. I am in no rush. Your post just reminded me :beige:

Posted by: uniserver on 2013-11-09 14:17:42
lol dylan! you been leaving poor macdrone hanging 🙂

Posted by: Macdrone on 2013-11-09 14:29:10
Never. He's gone above and beyond.

Posted by: uniserver on 2013-11-09 15:01:01
Yeah, i'v had the same experiene.

Amazing how he does so much and has time for a family.

< 22 >