68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
I checked the state of the collection, but ...
Posted by: Themk on 2017-05-25 17:14:23
for Themk

I have not tried system 6x + Tokamac.

According to the manual, it seems that it can operate also on System 6x.

System 7.6.1 + Tokamac, the operation was possible.

OS is not a problem because some have.
Ahh, very cool! System 7.6.1 is a good choice for a IIfx, but with System 6 that would have been one super powerful mac!

Congratulations on all of the cool stuff you have!
Posted by: samurai-j on 2017-05-25 22:01:27
OlePigeon, Themk, thank you!

I plan to repair IIfx with a solid electrolytic capacitor.
Posted by: samurai-j on 2017-06-09 07:10:29
Repair of IIfx is completed and it works perfectly!

I found an IBM DDRS HDD that works without problems.
Therefore, the SD, CF drive has not been created yet.
I will introduce my collection again.
 
https://goo.gl/photos/NYwM7in9PxXesEku8
 
 
I received a PM from which the photos disappeared.
The place where you uploaded the photos has expired and the photos disappeared.
Instead, I uploaded a picture to this place.
Thank you.
Posted by: samurai-j on 2017-06-09 08:38:28
Because there was a mistake a bit,

I plan to release the photos at a later date. I'm sorry.
Posted by: samurai-j on 2017-06-09 09:05:06
I uploaded it

https://goo.gl/photos/U6BdddPCMnyDEMyD8
Posted by: olePigeon on 2017-06-16 15:23:14
What mode monitor are those?  I like the design.  They'd work well with my IIci.  All I can read is Eizo.
Posted by: samurai-j on 2017-06-17 01:52:33
Although the viewing angle is narrow,

Operability on Old Mac is good.
It was a used item, which was $27.
 
FlexScan L465
http://www.eizoglobal.com/support/db/products/model/L465
Posted by: olePigeon on 2017-06-19 14:16:18
It looks nice anyway.
Posted by: patatas on 2019-05-04 09:09:52
I have to repair IIfx first.

The manual is not original, it is a copy.

Important things about PAL are not written.
 
Since there is no time,
PDF conversion of all pages is currently impossible.
I shot the page only for PAL.
Extra pictures of the second piece 🙂
 

 
 
Can you repost the two pictures related to the PAL bug?
Posted by: IlikeTech on 2019-05-05 19:16:33
@patatas Um I think you just resurrected a thread from over two years ago and that person hasn't been on in over two years.  I doubt you will get a reply.
Posted by: olePigeon on 2019-05-06 08:13:21
@patatas  Do you have a Tokamac IIfx, Patatas?
< 2