| Click here to select a new forum. |
| Challenger's conquests |
Posted by: LaPorta on 2021-01-29 07:06:43
I'm amazed those radials fit in there!
|
Posted by: Challenger 1983 on 2021-01-29 07:08:20
They actually fit amazingly, there's more room with them than the original caps which was surprising.
|
Posted by: Challenger 1983 on 2021-01-29 07:09:15
I have a spare 280 board to recap next so I might try surface mounts all around with that board
|
Posted by: LaPorta on 2021-01-29 07:18:38
I've gotten in the habit of measuring the caps. I got burned once or twice with power supplies and the new caps being too tall, etc. In fact, I actually am going to do a video soon on the ways I do surface mount caps. I gave up on actually using hot air on them: the iron gives me way more control and I have heat on the board far less. There's a few methods I use as a beginner, but I get along with simple tools and I have learned a few things along the way that perhaps others can learn before messing things up as I did!
|
Posted by: Challenger 1983 on 2021-01-29 07:31:52
Definitely! it would be nice to have a video resource for recapping, I usually pick the smallest cap with the correct values when working with PowerBooks, and I make sure to clean and flux the board before applying the new caps, it works every time for me
|
| < 2 |