68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| SCSI2SD Universal Mount | |
| Posted by: ants on 2017-08-28 15:28:12 Trash80toHP_Mini - designing a mount that doesn't require disassembling most of the SE/30 to remove the drive would be great. I'm just waiting for the day that I break something or fry a board due to my stupidity. And yeah in hindsight I probably should have drilled larger pilot holes for the screws I was using - as there was a risk I could have broken the mount with the pressure I was applying. Alternatively, getting shorter screws would have been safer - perhaps around 5mm. | |
| Posted by: reallyrandy on 2017-10-05 09:41:43 Printing one now, Thanks Joe!  | |
| Posted by: CharlieFrown on 2017-10-12 04:00:21 wow looks great,,, any chance for SCS2SD v4 mount? | |
Posted by: aperezbios on 2017-11-05 11:54:15wow looks great,,, any chance for SCS2SD v4 mount?That seems very unlikely, unless you do it yourself, as V4 boards have not been manufactured in nearly three years. The percentage of all SCSI2SD devices out there which are V4 is _very_ small, I'd wager less than 1%, at this point. | |
| Posted by: CC_333 on 2017-11-07 11:39:42 Then I must be very unique, since I have several V3 boards sitting in my closet. I remember when V1 came out, it wasn't that long ago. 2014? 2015??? Somewhere in that range, I think. c | |
| Posted by: Byrd on 2018-04-01 03:24:51 Hi Joe, Just a quick note to say thanks for making up this mount - I've just printed it out for a Quadra drive sled, using a SCSI2SD v6. It fits and works perfectly. JB | |
| Posted by: Iamanamma on 2019-11-15 13:22:58 Thank you for this mount! It works beautifully with the V5.1 boards! | |
| < 2 |