68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | SE/30 mouse issue. | Posted by: crazyben on 2025-01-28 14:42:14
Yes. I've attached the SE/30 schematic. The first page has the PDS slot. Pins 4, 44, and 84 are the 3 Interrupt ReQuests (IRQs). Slot pin 84 (IRQ1) should have continuity to pin 2 of the chip at UK11 (page 4 of the PDF). Pin 44 (IRQ2) should have continuity to pin 3 of UK11, and pin 4 on the slot should have continuity to pin 4 of UK11. Thank you 🙂 | Posted by: LeSpameur on 2025-05-10 04:11:33
Hi, same issue here with a stock recapped SE/30. Click and keyboard are working fine. But the mouse isn't moving. Already checked broken traces underneath the ADB chip and VIA2, I even looked at the microscope, but no broken traces. What should I check next ? My analog board works fine. | Posted by: LeSpameur on 2025-05-10 04:31:12
Update : I'm getting the movements signals on the ADB chip. | | < 2 |
|