| Click here to select a new forum. |
| NEW Injection Molded - iMac G3 Inner Bezels |
Posted by: 68kPlus on 2023-12-28 21:28:30
Bumping this up so people can back it. I have two slot loaders so I would be interested if the bezel did break on them, but mine aren't broken |
Posted by: LaPorta on 2024-01-20 20:22:14
Nine days to go....I really hope this works. |
Posted by: Iesca on 2024-01-29 11:19:26
23 hours remaining, for those interested:
|
Posted by: 3lectr1cPPC on 2024-01-29 19:27:34
it reached the goal! |
Posted by: Jon42 on 2024-01-30 01:08:18
Coming soon (December 1st) a replacement inner bezel for the iMac G3. Even when you find new old stock units they crumble to dust. The Kickstarter goal will be for only half of the tooling costs. This is a must have for any slot load iMac G3 owner! Pricing will be $95-$149 (depending on quantity). Click to be notified by email when it goes live!!
These will not have the same fire retardants that cause them to brittle. It will also be offered in a clear color!
Kickstarter Link Hi, any sign of getting the 'Clear Apple IIe case AND IIe>IIgs 'Stealth' Conversion Kit' back in stock? I have a new/old stock IIGS ROM3 motherboard and all other new components ready to put into one of your very nice looking clear cases. Thx |
Posted by: Daniël on 2024-01-30 01:19:51
it reached the goal! Just $519 shy of the stretch goal to have the screw caps fabricated too, hoping a few more bezels get claimed in these last few hours so we can get those too 🙂 |
Posted by: Daniël on 2024-01-30 06:27:08
And the $25k stretch goal for screw cover clips and power button pieces has been met as well! Great success! |
Posted by: 3lectr1cPPC on 2024-01-30 06:30:33
This is great. I’ll probably end up ordering at least one at some point, I’ve got two of these slot loader iMacs. My Blueberry’s is ok for now but will likely break when I take it apart for a recap it needs. My graphite one on the other hand already has a huge crack in it. |
Posted by: joshc on 2024-01-30 12:30:50
Do we know why the plastic used for the original inner bezels ages so poorly? Just too thin or a factor of the composition of that plastic? |
Posted by: 3lectr1cPPC on 2024-01-30 12:39:39
Far from the only plastic that new to be junk. I’ll admit that it is especially bad though. Could be composition, design, the fact that it’s baking in a fan-less iMac, sun exposure, or a combination of them all. |
Posted by: joshc on 2024-01-30 12:52:32
True. Back when I had a new Dalmatian iMac I remember it got so hot I used to switch it off after about 4/5 hours. Its flyback died when it was 6 years old. RIP. I loved that computer! |
Posted by: 3lectr1cPPC on 2024-01-30 12:57:33
I swear they’re just cursed machines. Neither of mine show signs of flyback failure but I’m pretty sure the caps are going out on both, especially my otherwise mint blueberry. The whole screen geometry shifts when changes happen on the screen.
I’ve seen delaying recapping it for so long due to the fear of that darn bezel. Maybe I’ll finally give it a go if I get one of the new ones. |
Posted by: Iesca on 2024-01-30 16:50:57
Supposedly it's the fire retardant in the original plastic that leads to it aging poorly and becoming brittle. It's being omitted from the formulation of the new ones. |
Posted by: maceffects on 2024-01-31 10:06:43
Yes, that will be back in stock tonight!
Hi, any sign of getting the 'Clear Apple IIe case AND IIe>IIgs 'Stealth' Conversion Kit' back in stock? I have a new/old stock IIGS ROM3 motherboard and all other new components ready to put into one of your very nice looking clear cases. Thx
I'm beyond thrilled it reached the goal. It is too late to save many older Macs but now the iMac G3 machines can certainly be saved!
The iMac bezel issue is a combination of heat, sunlight, general age, and mostly the chemistry of the plastic (fire retardant). |
Posted by: LaPorta on 2024-01-31 10:13:12
My DV SE is still in good shape, but I have not yet taken it apart or overhauled it in the nearly 25 years I have owned it. Having one of these will make me confident to do it all in one shot. |
Posted by: maceffects on 2024-02-01 12:01:11
My iMac G3 700mhz is in a sad shape with a cracked bezel, grinding hard drive, and popping at the fly back transformer, and in need of capacitor replacements. I've put off doing anything with this until I know I can actually put it back together!
My DV SE is still in good shape, but I have not yet taken it apart or overhauled it in the nearly 25 years I have owned it. Having one of these will make me confident to do it all in one shot. |
Posted by: LaPorta on 2024-02-01 13:04:37
My iMac G3 700mhz is in a sad shape with a cracked bezel, grinding hard drive, and popping at the fly back transformer, and in need of capacitor replacements. I've put off doing anything with this until I know I can actually put it back together! Same boat. I think I’ll also buff its back shell as well, like I did in the G4 video I made sometime back. Hopefully I can get it like new.
Where does one source new fly backs for these, anyhow? |
Posted by: derekdavidkent on 2024-07-29 10:37:29
I see their CAD screenshots on the kickstarter - when are they releasing the STL for people to print themselves? |
Posted by: finkmac on 2024-07-29 11:16:31
never lol
i'd be happy to be proven wrong, however... |
Posted by: derekdavidkent on 2024-07-29 11:35:32
Why? seems a bit scummy if the intent is to preserve vintage tech. |
| < 2 > |