68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| SE/30 ... finally! | |
| Posted by: tecneeq on 2022-10-21 09:45:37 Continues here: | |
Posted by: mg.man on 2022-10-29 02:50:55Can't use the Mac Con card, seems a capacitor is broken, i'll start another thread to find out if i can replace it and what value it needs to have:Did you (start another thread)? I have one of those cards, so should be able to take a pic or two to help. | |
Posted by: tecneeq on 2022-10-29 03:35:11Did you (start another thread)? I have one of those cards, so should be able to take a pic or two to help.Not yet, i'm still tweaking my 3d print setup for RaSCSI, that takes some time, and i have another problem with a Q650. If you are able to get a picture of the capacitor in question i would be grateful.  However, the printing on these is extremely tiny, i doubt you will be able to read something, i couldn't. 😉 | |
Posted by: mg.man on 2022-10-29 03:45:34If you are able to get a picture of the capacitor in question i would be grateful.Well sure... but you need to let me know 'where' I'm looking - there are LOADs of those tiny critters! | |
Posted by: tecneeq on 2022-10-29 03:57:01 There it is. | |
| Posted by: mg.man on 2022-10-29 05:57:22 Good news, they are identical...  ...looks like a 22uF, 16V tantalum 'bead' capacitor. | |
| Posted by: tecneeq on 2022-10-29 06:00:44 Cheers! I put one in my Mouser basket. 😊  | |
| < 2 |