68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Dead SE/30 Power Supply (no fan, no voltages at floppy connector) | |
| Posted by: bibilit on 2022-10-15 04:37:02 Dp3 and DP4 near the Tda4605 | |
Posted by: stansteph54 on 2022-10-15 07:58:23Dp3 and DP4 near the Tda4605thanks a lot again for your help. I guess they are very common/standard diodes ? Any idea to test the optocoupler ? | |
| Posted by: bibilit on 2022-10-31 11:04:00 No way to test | |
| Posted by: ScooberDiver on 2022-10-31 20:46:50 If you have that Sony CR44 out of the Mac, make sure you give it a decent load to get reliable voltage readings. I was only pulling 0.1 amps from the +5 rail and it caused low outputs on two other rails. I gave that +5 a much bigger load and everything was OK. Here's my before/after. Unfortunately I didn't have power resistors laying around that let me do a little more than 0.1Amp. I had to go way higher, as you'll see LOL. Good luck.  | |
| < 2 |