68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Trouble removing solder from through hole component | Posted by: radiorich on 2020-05-16 16:35:37
Hello guys,
yes I also have used the needle idea and does work well I am going to order from mouser some chip quick just making a list for caps for my MAC SE/30 that am going to restore
| Posted by: radiorich on 2020-05-16 16:39:09
Hello joshc,,
what soldering iron are you using myself I have Weller soldering station and it gets nice and hot anyway that's cool that you are also rebuilding a Se/30 too they are like the best machine far as the B/W CRT ones go
| Posted by: joshc on 2020-05-17 19:35:58
The desoldering station worked perfectly, it just sucks the solder away immediately - wish I had bought one sooner!!
Hello joshc,,
what soldering iron are you using myself I have Weller soldering station and it gets nice and hot anyway that's cool that you are also rebuilding a Se/30 too they are like the best machine far as the B/W CRT ones go
I use this soldering station: http://yihua-soldering.com/product-1-3-2-hot-air-rework-station-en/147663/
You can see my SE/30 rebuild thread here, although the logic board I was working on in this thread is actually from a different SE/30, but this is the one that I have mostly finished:
| Posted by: radiorich on 2020-05-17 23:25:45
Hello joshc ,
that looks like a great station that you bought
| | < 2 |
|