| Click here to select a new forum. |
| Radius Color Pivot driver |
Posted by: BadGoldEagle on 2016-06-04 04:45:07
Hi Megabyte!
Which files did you install? It seems that some are for Mac IIs only. My SE/30 throws me an error now every time I want to boot it up.
I will uninstall and re install the drivers today, see if it makes a difference.
|
Posted by: megabyte on 2016-06-15 04:45:49
Which files did you install? I don't remember - can look tomorrow. But SE/30 with Pivot card working perfectly.
|
Posted by: BadGoldEagle on 2016-06-15 09:57:53
That's nice of you! Can you tell me what kind of display you are using with it?
I knew you were going to pick up a 14" M1212 last time. I have one of those (probably dead) so if it works with your pivot card that would be neat!
|
Posted by: megabyte on 2016-06-29 13:26:15
As I understand, Radius Color Pivot is NOT compatible with extended memory modes on SE/30. I mean MODE32, 32-bit System Enabler and A/UX 3.0
So, only 8 mb RAM with color display, or up to 128 mb RAM but without video expanison 🙁
|
Posted by: BadGoldEagle on 2016-06-29 13:38:28
Thanks for the info man!
I'm not using any of those, and it still doesn't work... Which files did you install? All three?
Are you running system 7.1 or 7.5?
|
Posted by: megabyte on 2016-06-29 13:44:22
I tried different combinations 🙂 https://68kmla.org/forums/index.php?/topic/27732-mode32-on-se30-with-4-mb-ram/?p=298048
Yesterday I installed A/UX and it is perfectly worked, until I remembered that I forgot to install Radius card.
With Radius card computer shows bus error at startup (with A/UX installed or 32-bit addressing enabled in System 7). Without this card computer is fully functional.
🙁
|
Posted by: BadGoldEagle on 2016-06-29 14:07:38
So correct me if I'm wrong, but you are using 7.1 with 4mb of RAM, right?
And which files have you installed on your system?
The driver from the Macintosh Garden contains:
- ▯Soft Pivot Driver (extension)
- Dynamic Desktop (control panel)
- Soft Pivot (control panel)
Did you install all 3?
Thanks again for your help!! 🙂
|
Posted by: megabyte on 2016-06-30 04:11:09
No, I am using 4x16mb simms + 4x1 mb simms
As I remember, I installed all of these files, but I deleted Soft Pivot because I don't need this functional.
|
Posted by: 9166188 on 2017-03-24 06:50:57
Hi!
I successfully installed Radius driver on my SE/30 and it works perfectly 🙂 I used old NEC LCD monitor for testing, but recently found a M1212 monitor in Moscow and want to purchase it at next week.
I will make a photos (and may be a video) of my setup soon. Hi megabyte, did you get your SE/30 working successfully with a M1212 Apple CRT? I am trying to get a SE/30 Pivot to work with Apple M0401, but to no avail.
|
| < 2 |