68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
Dayna Mini Etherprint
Posted by: mactjaap on 2017-04-10 10:16:49
Bought yet another one! Nice for playing around with LocalTalk. I was unsure about its voltage? Is it 5V, 12V. Not sure anymore. Anyone knows this? 

And anyone with a manual of this device (PDF) ? I couldn't find it online.

This is the device:

IMG_9374.JPG

IMG_9375.JPG
Posted by: Themk on 2017-04-10 10:26:59
Oooh nice! Im gonna have to get one for my IIgs, so I can give it ethernet. Would also make a nice addition to the SE.
Posted by: mattislind on 2017-04-10 11:47:54
It is 5V 1A



/Mattis
Posted by: mactjaap on 2017-04-10 12:48:37
Thanks Mattis! I will write it down and remember!
Posted by: mactjaap on 2017-04-10 12:50:21
And yes. They can be bought. Online at a Swiss store:

http://www.revamp-it.ch/index.php/en/shop-en/externe-netzwerkgeraete-en/dayna-mini-etherprint-plus-detail
Posted by: Themk on 2017-04-10 14:01:37
Will they ship to the U.S.A.? If so, Im gonna buy one! (Or 2, says they have 2 in stock)
Posted by: mactjaap on 2017-04-10 14:16:16
I think they ship to the USA. But you better ask.
Posted by: mactjaap on 2017-04-11 13:18:25
Another adapter. Asanté this time

https://www.ebay.com/itm/272601203095
Posted by: Themk on 2017-04-11 13:55:10
I sent an email to them asking about shipping to here, hoping to hear back soon. Heard back, they will ship to U.S.A. for US$36... Got to think about this now
Posted by: Themk on 2017-04-11 18:54:11
... which works out to be $28 per adaptor SHIPPED. Hmm, I guess not so bad?!

I think I am going to go for it.
Posted by: Themk on 2017-04-11 20:07:49
Thanks mactjaap for showing these to me! I ordered two, they are on the way from Switzerland now 😀 .
Posted by: mactjaap on 2017-04-11 22:12:02
Two LocalTalk adapters liberated! 🙂

Posted by: mactjaap on 2017-04-11 22:12:17
Two LocalTalk adapters liberated! 🙂

Posted by: Themk on 2017-04-12 14:57:40
I will be sure to try out your VM as soon as I receive them 😀

Posted by: Themk on 2017-04-27 14:08:48
I got my adaptors today, very nice! Looks like they wern't made too far away from where I am, as the company that originally made them was based in SLC, Utah. I had two different ROM revisions, and revamp-it shipped me two 5V 1A power adaptors with my order! Nice! The PSUs are also the ones that you need to connect to American power receptacles and line voltages; perhaps they didn't send you one mactjaap because they knew it would be incompatible with your AC mains.

The Pics:

IMG_5189.JPG

Here you can see my two different ROM revisions:

IMG_5190.JPG

I also cracked these open to take pictures of the PCB (This PCB is the ROM revision 3.1.1 PCB, but the PCBs are identical except for the socketed ROM chip in the upper corner):

IMG_5191.JPG

IMG_5192.JPG

I am going to have to try out your VM now mactjapp! But first lets get these physically connected to the SE/30 🙂

P.S. These adaptors are going to be Retr0brighted
Posted by: Themk on 2017-04-27 14:46:21
Does anybody have a manual for these? Just curious

Thanks!
Posted by: Themk on 2017-04-27 16:32:40
This device is reported as a 10BaseT half-duplex device to my switch, is there any way to make it full-duplex?
Posted by: MikeatOSX on 2017-06-23 00:32:08
Hi,

I got this Dayna Mini EtherPrint too. 🙂

So I need it's software now:

Dayna EtherPrint Administrator Software 3.2.1

Dayna EtherPrint SecurIt Control Panel Utility 1.0.4

but Intel doesn't want me to download these files here:

http://intel.driversdown.com/Intel-drivers/s_230_1.shtml

Any suggestions?
Posted by: mactjaap on 2017-06-23 04:10:29
You don't need any software for normal use. Just connect to your LAN and Mac an go ahead!
1 >